12 Best Budget Plasma Cutters – Review & Buyer’s Guide

Selecting a plasma cutter that comes under your budget and meets your needs is one of the things you can rightly do. Before buying, it is important for you to make sure of the purpose of using a plasma cutter. A plasma cutter is a metal fabricator which provides indulgent cutting of metals. It is inherently used on-site construction and in a scrapyard. Plasma cutters make the cuttings easy for heavy metals and alloys, which makes your task effortless.

There are a variety of plasma cutters available in the market which fulfill all the needs of the customer under a friendly budget. For knowing about the elite product, you need to follow the article where you will get 12 different range plasma cutters that will lie under your budget. The reviews and tips of contrasting plasma cutters will make your selection easy and satisfactory!

12 Best Budget Plasma Cutter





1. LOTOS LTP5000D Plasma Cutter


Less power consumption

2. PrimeWeld 50A Air Inverter Plasma Cutter


Best for hobbyist

3. PrimeWeld Pilot Arc 50A Plasma Cutter


Reasonable price

4. Forney Easy Weld 251 20 P Plasma Cutter


Sturdy construction

5. Reboot Plasma Cutter Machine


High frequency

6. SUPER DEAL Plasma Cutter


Smooth cutting

7. Plasma Cutter, CUT50 50 Amp


IGBT technology

8. HEROCUT Plasma Cutter


Highly robust

9. TOOLIOM Plasma Cutter


Best for hobbyist

10. MELLCOM CT520D Welding Machine, Plasma Cutter


Extra accessories

11. Warfox Plasma Cutting Machine


Less power consumption

12. VIVOHOME Portable DC Inverter Plasma Cutter


Plasma cutting is the speedy way of cutting metal and alloys by pressing a hot jet. This metal cutting technique is one of the safest techniques that one can use. Artists and designers commonly use it for sculpture, signage, and also in decorating panels. Depending on the type of work and project, you can pick plasma cutters accordingly. Here are the best budget plasma cutters that will provide a satisfactory experience of working.

1. LOTOS LTP5000D Plasma Cutter – Cheap Plasma Cutters


  • Non-touch pilot arc
  • Dual-frequency
  • Ventilation system
  • Budget-friendly
  • Accurate cutting


  • Has short ground clamp

LOTOS LTP5000D is the prime plasma cutter that will surely come under your budget. It provides quality features under $500, which is a suitable amount of money. The LTP5000D plasma cutter is light in weight and a compactly designed machine. It consists of a suitable handle which makes it portable for easy carrying and handling.

It consists of the non-touch pilot arc, which allows efficient cutting without touching the metal tip. This plasma cutter is supreme for cutting alloy steel, aluminum, stainless steel, mild steel, and copper. Its 50 amp cutter uses high-frequency inverter technology, which delivers a sufficient amount of current and allows precise cutting.

It provides an ideal cutting that cuts ¾ inches of severance cuts and ½ inches of clean cuts at 10-50A and 10-35A DC output, respectively. The dual voltage input allows the machine to select the voltage automatically once you plug it in. Its automatic dual voltage has a frequency for both 110/220V for choosing 50/60 Hz of frequency accordingly. This cutter has a PAPST which is basically an advanced German ventilation system that provides cooling and reduces heating effects.

LOTOS LTP5000D Plasma Cutter on the table

This is the best budget plasma cutter that is strongly constructed and provides a cooling sensation that reduces heating. Its portable quality makes it easy to carry from one place to the other. It is easy to use after reading and understanding the manual provided with it. The LOTOS LTP5000D plasma cutter works fastly and provides smooth cutting.

2. PrimeWeld 50A Air Inverter Plasma Cutter – Inexpensive Plasma Cutter


  • MOSFET technology
  • Dual voltage compatibility
  • Less power consumption
  • Best for ordinary welding
  • Speedy and precise cutting


  • Not for professional task

The PrimeWeld 50A offers durability, quality performance, and portability. Among all, it comes at a low price and provides significant results. It is best to work on DIY projects and metal cutting. This plasma cutter provides the proper regulation of current, which provides precise cutting and functioning. Its robust construction provides strength to work in rugged industrial and commercial surroundings.

This cutter is virtually used by technicians who are working in metal fabrications. But it is not as powerful to use for heavy metals cuttings. This plasma cutter uses a high-frequency arc which is best for ordinary welding and cutting of dense metals. It cuts maximum severance cuts of about ¾ inches and steel cuts of about ½ inches at a capacity of 50 amps.

Its high-frequency DC plasma provides less distortion of the materials and allows speedy cutting. It comes with dual voltage compatibility (110V and 220V) giving you the choice to plug any power source that is available. The MOSFET transistors provide lower power consumption and allow accurate cutting output.

The lower price of this plasma cutter provides an accurate cutting of the metals. This plasma cutter works best while working on meticulous cuts. The knob allows you to set the output voltage, allowing you to choose levels of cutting accordingly. Its portability and lightweight make it handy and convenient.

3. PrimeWeld Pilot Arc 50A Plasma Cutter – Pilot Arc Plasma Cutter


  • 3 in 1 system
  • Best for hobbyist
  • IGBT technology
  • Switching technology
  • Automatic voltage


  • No-touch pilot arc

The PrimeWeld Pilot Arc 50A plasma cutter provides maximum functioning in one unit. This plasma cutter consists of three different systems in a single unit like plasma cutting, stick welding, and TIG. Instead of purchasing different machines, this 3 in 1 system is best to purchase at a lower price. For a hobbyist, this cutter is best to perform all the works precisely and smoothly.

The lightweight makes it portable to carry along easily from one place to the other. This machine is best to cut metals, copper, nickel alloys, aluminum, stainless steel, and many more. The electric current for plasma cutting, stick welding, and TIG is 50A, 200A, and 200A, respectively. The pilot arc can cut up to the metals that are ½ inches thick during TIG and stick welding of about ¼ inches of thickness.

This plasma cutter uses IGBT technology, makes it smaller and lightweight, which provides fast speed of functioning. The power frequency of this plasma cutter is about 50/60 Hz. This is a multi-process machine that provides a dual voltage (110V and 220V), allowing a choice to operate accordingly. Its better quality and precise cutting make it unique to purchase at a lower price.

The PrimeWeld Pilot is another best plasma cutter that comes under your budget. It provides all the facilities in its machine functioning, making it easy to work on different tasks on the same system. The automatic switching detects the voltage according to requirements. This plasma cutter machine comes with a three years warranty and can be returned if issues are detected.

4. Forney Easy Weld 251 20 P Plasma Cutter – Cheapest Pilot Arc Plasma Cutter


  • Durable
  • Drag torch technology
  • Smooth cutting of metals
  • Additional packages involved
  • Air compressor
  • Reasonable price


  • No dual voltage ability

The Forney Easy Weld 251 plasma cutter is an affordable machine. It is a great choice that one can consider for its workshop, projects, and metal arts. The beginners will find this plasma cutter easy to work on because of its effortless functioning. This is a portable plasma cutter that can be easily moved and carried along. The weight of this compact-designed cutter is about 21.5 pounds. Also have a look at best entry level CNC plasma table.

It consists of a comfortable handle which provides easy convenience. This machine is durable, which protects it and prolongs its life to use it for a longer period of time. The air dryer is also present, which regulates the air and avoids heating. The package includes the torch, adapter, electrode, and nozzle. The maximum cutting thickness of this cutter is about ¼ inches of 20 amps.

This plasma cutter uses the drag torch technology in the initial procedure. For generating a cut, the drag torch needs to be tipped at the working portion. The drag torch provides a smooth and leveled cut. The power source of this economical plasma cutter is about 120V. It is available in an attractive green and black color.

Elizbeth working on Forney Easy Weld 251 20 P Plasma Cutter

This plasma cutter is best for personal projects and small workshops. It is budget-friendly and provides a leveled cutting experience. Its power source is very convenient, which allows easy operating of the machine. The setting of the machine is quite easy, and fewer parts need to be built in for functioning.

5. Reboot Plasma Cutter Machine – Affordable Plasma Cutter


  • Maximum cutting of thick metals
  • Sturdy construction
  • Three years warranty
  • Lower price
  • Cut varieties of metal


  • The non-touch option is unavailable

If you are looking for the best plasma cutter at a lower budget under $500, then the Reboot machine is the best to opt for. This sturdy, heavy-duty designed machine performs well and provides authentic results. The best thing is that it comes with a three-year warranty, and it is all because of its supreme quality. This plasma cutter can be connected to 110V of a conventional wall plug.

It provides the ideal cutting of ½ inches at 20-50 A of electric current and ¾ inches severance cutting. The air pressure of this plasma cutter is 60 PSI which is highly recommended. This plasma cutter is best for cutting metals like aluminum, carbon steel, stainless steel, mild steel, and alloy. The Reboot plasma cutter is widely used in ducting work, metal processing, and maintenance of metals.

This machine consists of a breaker, a 30 amp breaker for 220V, and a 50 amp breaker for 110V. The voltage for cutting depends upon the thickness of the metal. For cutting the ⅜ inches of thick metal, it requires 110V of input while 35A of electric current. The touch arc consists of the roller that guides the arc starting point.

The Reboot plasma cutter is a high-quality machine that provides fine features and comes at a suitable price. The auto dual voltages allow it to work accordingly after selecting the suitable range of voltage. Its strong construction makes it more powerful and robust.

6. SUPER DEAL Plasma Cutter – Best Affordable Plasma Cutter


  • High frequency
  • Powerful
  • Provides protection
  • Air regulation
  • No voice
  • Portable


  • Not a dual voltage plug

The SUPER DEAL plasma cutter comes with a good power supply and is budget-friendly. The power supply of this machine is 110V, but it can be increased up to 220V for heavy functioning. It is designed in a way that it operates 20 to 50 amps of output current. There is a digital display at its forefront, which shows the current. The weight of the item is 24.4 pounds.

This powerful cutter is best for cutting brass, steel, aluminum, and copper with a thickness of ½ inches. The frontal display provides the information of welding by displaying the data input. The air gauge is also present in a perceptible area. Its high duty functioning saves power and results in less power consumption.

While cutting the metals, it provides complete protection to the material. It also provides safety to the machine. The extra features include under-voltage, overheat, overvoltage, and under heat. It also consists of a cooling fan that regulates air and reduces overheating effects. This plasma cutter saves energy, and it provides a silent operation.

This plasma cutter is the best that comes under the budget of the user. It is used in automotive ducting work, metal fabrication, industrial use, maintenance services, and site work. It is highly demanded by the professionals to use in businesses and by DIY users. The wire and mask come with it, which protects the user while using it.

7. Plasma Cutter, CUT50 50 Amp


  • Inverter switch
  • Efficiency increase up to 30%
  • Portable
  • LCD display
  • Smooth cutting


  • Solid construction

The CUT50 amp plasma cutter is designed to cut accurate metal. Its high-quality work provides satisfactory and precise metal cutting. It consists of the inverter switch power, which saves the product life and increases its efficiency of working up to 30%. This machine provides more smooth cutting than the other usual machines.

It consists of high-quality consumables that consume less power and work for a more extended period of time. This plasma cutter is portable, which makes it handy and light in weight. The LCD display provides convenient operating of the machine as it shows the rate of current supplied to the cutter. The product’s weight is 19.06 pounds, and its dimensions are 18 x 14 x 11.25 inches in LxWxH, respectively.

It has a dual voltage system (90-260V) which automatically adapts to the right power when plugged into it. The plugs are of their own, and no external plugs are attached to them. This plasma cutter is basically used for cutting mild steel, cutting stainless steel, copper, and color metal. It cuts the metal with a thickness of 1-20mm.

The CUT50 is another best budget plasma cutter that provides the precise cutting of the metal in less time. It is powerful and saves the time of the user, and consumes less energy. It assures the quality and provides three years warranty and free return if found any damages.

8. HEROCUT Plasma Cutter


  • Cut thick metal smoothly
  • Long cuts
  • IGBT technology
  • Consumable
  • Transportable


  • Not function properly

HEROCUT is another supreme quality plasma cutter that comes with IGBT technology. It is the safest machine that is long-lasting and provides systematic functioning. This plasma machine has 30A of electric current with an input voltage of 110V. This powerful cutter cut 8mm of thick plate with an output current of 35A.

This is best to cut the car flame; the cutting of clean metal thickness that it can cut is 4mm-6mm in 110V. This machine cannot work at 220V; before buying, check the voltage capacity. The dimensions of this plasma cutter are 14.5 inches in length, 11.3 inches in width, and 10 inches in its length. It can cut the galvanized sheet of ⅛ inches and angle steel of about ¼ inches.

After cutting the metal, it quickly cools down without providing much heat. The avoidance of heat is because of the air compressor, which works at a rate of 40L/min. It can even sometimes cut the long cuts of about 1/16th inches of sheet steel. The overall weight of the product is 13.97 pounds. This cutter is built-in, lightweight, and makes it movable.

For a hobbyist and a small project, this is the best plasma cutter that comes at a suitable price. It works best and provides a smooth cutting experience. Use glasses that will protect your eyes from danger. This powerful plasma cutter provides high-quality welding. It also saves energy and allows it to work for a longer period of time.

9. TOOLIOM Plasma Cutter


  • Consist of plug adapter
  • Economical
  • Avoids deformation
  • Highly robust
  • Handy


  • Not durable

TOOLIOM is the best economical plasma cutter that comes with a non-touch arc. In the non-touch arc, the user does not touch the metal plate, and it starts the arc itself. This plasma cutter is highly potent and cuts the metal at a speedy rate which consumes the cutter life. This cutter is made up of copper material which saves time and avoids deformation of the metal.

The TOOLIOM plasma cutter has a unique and advanced handle, which provides easy gripping and makes it handy. It has a high frequency, which makes it even more simple to start an arc. This cutter will competently cut the painted, rough, and hoary surfaces. The air compressor suggested for this plasma cutter is 220V at 50 amp (73 PSI) and 110V at 40 amp (65 PSI).

The plug adapters are also included with this plasma cutter. This cutter is used for cutting mild steel, stainless steel, copper, alloy steel, and colored metals. It cuts the clean cut of about 15/64 inches and maximum severance cut of about 13/64 inches at a voltage of 220V at 50A of current. The dimensions of this cutter are 17.5 x 16 x 11.5 inches in length, width, and height, respectively.

This plasma cutter finishes the work efficiently, even if the metal is rough, rusty, greasy, or painted. It works best on each type of metal and provides fast functioning. The LCD display provides a clear version of data. The working of this plasma cutter is quite easy. The package includes a brush, nozzle, electrodes, ground clamp, and air pressure regulator.

10. MELLCOM CT520D Welding Machine, Plasma Cutter


  • Lower in price
  • Three welding modes
  • Best for hobbyist
  • Superb performance
  • Welding machine
  • Lightweight


  • No welding amp control

The MELLCOM CT520D welding machine is the best budget plasma cutter, fulfilling all the needs of the user. It is a powerful machine and performs best at a lower voltage, and is consumable. Its high frequency provides reliability to the working and functioning of this welding machine. It is unique and consists of the MOSFET power device, which provides fast and easy operation.

This plasma cutter supports the three welding modes, MMA, TIG, and PLASMA. These modes allow the welding of alloy, carbon steel, stainless steel, and nonferrous metals. These welding modes work best at 110V/220V. This plasma cutter is versatile in nature which fulfills the daily basic needs. You need to connect the wires at different interfaces for specific functioning.

The compact structure of this welding plasma cutter provides an exquisite performance, and its lightweight (32 lbs) makes it easy to carry along. It consists of the manual, which makes it easy for you to understand how it actually works. Its package includes a 300A welding torch, oil and water separator, hose clamps, nozzles, cutting torch, and electrodes.

Well, this welding plasma cutter is best for hobbyists and metal fabricators projects. One can get it at a very suitable price, and its high-quality functioning makes it quite unique. It comes with three years of warranty. If you find any damage or missing parts then you can freely contact them for a return policy and your problem will be resolved quickly.

11. Warfox Plasma Cutting Machine


  • Affordable
  • Dual voltage
  • Adjustment of time
  • LCD display
  • Extra accessories


  • Tricky to use

The Warfox plasma cutting machine comes with a dual voltage and at an affordable price. The IGBT inverter technology makes it more efficient for smooth functioning. The frequency of this IGBT inverter plasma cutter is about 50/60 Hz. Its high frequency is best for starting arc touch metal. The weight of this item is 22.1 pounds, while its dimensions are 18 x 13.8 x 11.8 inches in length, width, and height correspondingly.

The voltage of this plasma cutter is about 120V and 220V at a current of 50A. The maximum thickness for cutting metals by this plasma cutter is about 10mm and 14mm at a voltage of 240V under 50A of current. For 120V at 35A of current, the thickness to cut the metals is about 8mm, while that for severance cutting is 12mm. The LCD display of the Warfox plasma cutter shows the rate of current and time adjustment.

The adjustment of post time is from about 2 to 20s, and the time can be adjusted for cooling, post air, and for extending its consumables functioning life. It also includes the accessories, which are 2 meters air hose, 2.5 earth clamp, electrodes, 4M cutting torch, adaptor, and many more. The air gauge, air stimulator, and air filter are also fixed with this plasma cutter machine.

This is another plasma cutter machine that is available at a suitable price. One can buy it for fast and smooth cutting. It provides precise results and average thickness for clean and severance cutting. This is a handy machine that makes it easy to carry and simpler to use for small tasks. It will provide satisfactory results increasing value for your money.

12. VIVOHOME Portable DC Inverter Plasma Cutter


  • Speed increase upto 1.8
  • Portable
  • PWM technology
  • Precise welding and cutting
  • Less power consumption
  • Rectification current


  • Not a high-quality machine

The VIVOHOME plasma cutter is a portable cutter machine. It has a great speed of cutting metals which can be increased by 1.8 times. The faster speed increases its cutting ability and provides more productive work in less time. The oxy-acetylene cutting cuts the thick portion easily and a wide range of different materials. The dual voltage for this machine is 110V to 220V at a cut of 50A.

The weight of the machine is 25.5 pounds, which is quite handy for carrying along. The dimensions are 19.29 inches in length, 13.39 inches in width, and 10.79 inches in its length. The frequency of this cutter is 50 Hz which MOSFET can increase to up to 100KHz. The high frequency allows faster cuts.

The inverter is powerful and provides precise cutting and welding. This cutter consists of the PWM technology, which lowers the power consumption and provides 100% efficient working. It cuts the metal with a maximum thickness of 1 to 12mm.

This plasma cutter machine is widely used for cutting alloy steel, copper, stainless steel, mild steel, and also other suitable metal materials. It has a rectification current that provides a high Dc power output and a higher voltage output. For good cutting and welding, you can select this plasma cutter which will surely come under your budget.

Buying Guide

While you are searching for the best budget plasma cutter, there are some traits that you should contemplate. The difference and comparison will make it easy to choose the best plasma cutter. Don’t confuse yourself, and this buying guide will help you a lot to pick the perfect plasma cutter that will surely value your money. The following features detail will let you decide what things you should keep in mind while purchasing the plasma cutter at a suitable price.

Best Budget Plasma Cutters
Infographic: Best Budget Plasma Cutters

Input Voltage of the Plasma Cutter

While buying the plasma cutter, you should check its input voltage value. The input voltage will affect the working and use of the machine. The plasma cutter that comes under your budget has an input of about 110V. This much input voltage is adequate for you as long as you are working in the workshop. Similarly, there are plasma cutters that have a dual input of about 110V and 220V. This allows you to plug it in the heavy-duty generator for fast functioning and is best to purchase.

Maximum Cutting Ability of Plasma Cutter

The plasma cutter is meant for cutting, so while buying, one should check the maximum cutting ability of the metals. If you are buying a low-priced plasma cutter, then it will allow you to cut the metals with a thickness of about ½ inches at 50 amps. This is a good option, but for further thick metals, you should get a heavy-duty plasma cutter. A heavy-duty plasma cutter has a higher output. While buying, you must note its cutting capability that works best for thick metals.

Duty Cycles of Plasma Cutter

The duty cycle is basically the time period for how long you are using the plasma cutting machine. If you are working for minutes, then some plasma cutters get overheated, which might be dangerous. So while purchasing the plasma cutter, you must check its duty cycle. If you are working for 6 minutes, then its percentage rate is 60%; subsequently, you should let it cool down. A longer duty cycle plasma cutter is best to buy, which lets you work for a prolonged period of time without taking a break.

Portability of Cutter

If you want to use a plasma cutter for specific works, then you need to move it from one place to the other. There are several jobs that require taking the machine along for working. If you are buying a plasma cutter, make sure that it is portable and light in weight. This will make it easy for the user to move along effortlessly. The heavier cutters are difficult to drag; for easy and convenient carrying, buy the plasma cutter, which is portable.


Consumables increase the lifespan of the cutter, which consumes less energy and provides powerful working. For fast-working, you should buy consumables. Plasma cutters allow the pilot and non-pilot arc to start. In the pilot arc, you do not have to touch the torch metal, resulting in long consumable life. In comparison, non-pilot allows touching the torch, which drains it out. While buying, you should buy a pilot arc for long-lasting work.


The safety of the plasma cutter is probably the first priority of every user. Many of the plasma cutters provide protection against overvoltage and overheating. While buying the plasma cutter at a lower price, the protection of the machine should be checked first. The safety of the machine is for the user’s own sake. Before buying, check the safety measures the plasma cutter is providing.

Metal Thickness

Plasma cutters are used for cutting aluminum, copper, stainless steel, and alloy steel. Plasma cutters have different ranges to cut the metal thickness. While buying, you should pick the plasma cutter, which has a heavy-duty machine. The heavy-duty cutters provide smooth cutting of even thick metals. While buying, you should choose a cutter that fulfills all the requirements of your project.


How do I choose a good plasma cutter?

The best plasma cutter is the one that provides high-quality cutting. It often cuts ¼ inches of thick materials, but it cuts about ½ inches of thick metal.

What is the average cost of a plasma cutter?

There are varieties of plasma cutters available and in different ranges. It depends, but the average cost of a plasma cutter is in-between $400-$800. The average-cost plasma cutter is budget-friendly and provides a precise cutting experience.

How thick can a plasma cutter cut?

The plasma cutter usually cuts the maximum meta thickness of about 1 and 1.5 inches. It also depends on what kind of machine it is. A heavy-duty machine cuts more thick metals.

Can you weld with a plasma cutter?

You can weld with the plasma cutter if it has the correct torch design. You can also use aluminum and other stainless materials for welding.

How accurate are plasma cutters?

Well, if we talk about accuracy, then the plasma cutters are 95% accurate. It provides a smooth and precise cutting experience. The plasma cutter provides leveled edge cutting like a laser.

Is a plasma cutter easy to use?

The plasma cutters are pretty easy and convenient to use once you have learned the right way of using them. By reading and understanding the manual that is provided with it, one can easily learn how it actually works.


Before buying any product, firstly you need to clarify yourself about the use and working of it. You should know what kind of plasma cutter you need for your work. Varieties of plasma cutters are available that are budget-friendly and have a high value of money. These tips will surely help you to get the best one that comes under your budget. Here we are making it easier for you by picking up the top three plasma cutters that are cheap and provide precise cuttings.

  • PrimeWeld 50A Air Inverter Plasma Cutter has a dual voltage capability, and it is best for ordinary cutting and welding. The MOSFET transistors are also energy efficient as they consume less energy.
  • PrimeWeld Pilot Arc 50A Plasma Cutter is a 3-in-1 system technology that is best to buy at a lower price. It is best for hobbyist use.
  • SUPER DEAL Plasma Cutter is a quiet machine that works silently. It has a high frequency and provides full protection to the machine.

Find a suitable plasma cutter according to your work requirements. Now go get yours!

About Dave Walker

Dave Walker, a professional welder who has been welding from an early age. Now aims to help others by making them learning skills and finding them new opportunities. He has written for many welding blogs and helped many pursue their welding goals by helping them in choosing the best welding tools of the time.